Pioneer DJM-700-S - Manual (Page 24)

MIDI SETTINGS
24
En
PROGRAM CHANGE
MSB LSB
• EFFECT SEL BEAT
SNAPSHOT
Once the DJM-700-S/DJM-700-K is setup with parameters for a
given purpose, that set of parameters can be recorded as a
snapshot. When snapshot of the current status is recorded, all
messages for control change and program change are
transmitted. Hold the
MIDI START/STOP button depressed to send
the snapshot.
MIDI ON/OFF
Use the MIDI ON/OFF button to control whether the MIDI control
signal is generated. The default condition is MIDI OFF. Even when
MIDI OFF is selected, however, timing clock and snap shot
functions are supported.
0 0 EFFSEL2 EFFSEL1 EFFSEL0 EFFCH2 EFFCH1 EFFCH0
EFFSEL2 EFFSEL1 EFFSEL0
0 0 1 DELAY
0 1 0 ECHO
1 0 0 TRANS
1 1 0 FILTER
1 0 1 FLANGER
1 1 1 PHASER
0 1 1 REVERB
— — — ROBOT
— — — CRUSH
— — — ROLL
— — — REV ROLL
— — — UP ROLL
— — — DWNROLL
— — — SND/RTN
0 0 1 1
0 1 0 2
0 1 1 3
1 0 0 4
1 0 1 MIC
1 1 0 CF.A
1 1 1 CF.B
— — — MASTER
01_DJM-700_En.book 24 ページ ２００７年７月１０日 火曜日 午後８時４１分