AASTRA 600d (GAP) User Manual EN - Manual (Page 58)

52
Devices menu
Illumination
Display dimming
This setting means that the display illumination remains permanently active or
dimmed for a user-definable time (1 min … 240 mins) even when the device is
in Idle mode or in the charger cradle. This setting reduces the life of the battery.
Display Here you can select for how long the full display illumination (each time a key is
pressed, for instance) remains active (10 ... 240 s).
Keyboard Here you can select for how long the keyboard illumination remains active each
time a key is pressed (1 ... 240 s).
Charger
Here you can select for how long the display illumination remains active if the
device is placed in the charger cradle (off, 1... 240 sec.).
Conversation
To save battery energy, you can use this feature to specify the behaviour of the
display illumination during a call (light off, on, dimmed).
LED indications
You can switch the LED indicators on/off according to requirements (see also
page 17).
Life indication Slowly flashing green or orange LED.
Deactivated if the charge indication
(orange or green LED) is also deactivated.
Incoming call Rapidly flashing green or orange LED for
incoming call.
Out of range Rapidly flashing red LED if you are moving out of the
system's radio range
Charge indication LED lights up orange when the battery is being
charged and switches to green when fully charged.
Infos Slowly flashing red LED for a new entry,
e.g. in the call list.
Handsfree Lights green LED when the loudspeaker
is activated.
Appointment Slowly flashing red LED when the appointment
is signalled.
Alarm clock Slowly flashing red LED when the alarm time
is signalled.
List access
This setting is valid only if your device is used as a system phone.
This setting should always be set to Local on a device that is operated in GAP standard.
Otherwise the redial list and the caller list cannot be displayed.