AASTRA 600d (GAP) User Manual EN - Manual (Page 54)

48
Type Select whether the call tone melody should be played once or repeated.
Device Select whether signalling is made via loudspeaker (ringer), vibration alarm (not
Aastra 610d) and/or on the headset.
Volume Displays the ringer volume currently set. Use the √ and ® navigation keys to
adjust the volume (off, increasing or level 1 ... 7). If the ringer is switched off,
the
symbol is indicated alongside the entry as a reminder.
Noise detection
When this function is active, the volume of the ringer is automatically raised if
there is loud background noise. If you want to use this feature, make sure the
ringer volume is not on the “increasing” setting.
Attention tones
Select whether the respective attention tones should be activated or not.
Key click Audible confirmation when a key is pressed.
Confirm tones Confirm successful/unsuccessful settings.
End of menu Alert tone on reaching the end of a menu list.
Battery warning Alert tone if the battery is almost empty.
Only a few minutes are left before the call will be disconnected.
Coverage warning Alert tones if the wireless connection threatens to disconnect.
Alarm tone Aastra 630d only: This is the alarm tone sounded during the pre-alarm
(triggered by the Alarm sensor). This setting can be done in parallel
in the menu Alarm Sensor.
Loud environment
If the handset is mainly used in a loud environment, the handset attempts to improve the
voice transmission (does not apply to connections made with the Bluetooth headset and in
hands-free mode).
Devices menu