beautypg.com

Settings for other alarm parameters, Alarm time settings……………………………………………………………………33 – AASTRA 600d (GAP) User Manual EN User Manual

Page 40

background image

34

Basic functions

Delay
This is the period of time that begins after the triggering event (“mandown”, no movement, escape).
If during this time the triggering event is withdrawn for at least 2 seconds, the delay begins from the
start. The delay can be set separately for each alarm type.

Pre-alarm
This is the period of time during which an alarm tone – where activated – is signalled on the hand-
set before the alarm number is dialled. To deactivate the alarm tone (and therefore deactivate the
alarm), you need to press the Esc softkey. During the pre-alarm the display reading indicates the
amount of time remaining before the alarm number is dialled.
If during the pre-alarm the triggering event is withdrawn for at least 4 seconds in the case of "man-
down" and for at least 2 seconds in the case of the no movement alarm, the delay starts all over
again.
The escape alarm can only be withdrawn using the Esc softkey.
The time setting for the pre-alarm is made for all the alarm types.

Settings for other alarm parameters

Alarm number
If the SOS emergency number is predefined by the system, this menu item is not displayed.
For Aastra systems only: If you always store the SOS emergency number preceded by the R-key fea-
ture (enquiry / hold), the emergency call can also be made during a call (depending on the system /
and handset – see above). To enter the R-key feature, press the #-key three times (see also page 23).
Other systems: On other systems the “Hold” function may be generated using other codes. See the
relevant system documentation for the appropriate programming.
If no alarm number is stored, the SOS emergency number is dialled as an alternative –where availa-
ble.

Alarm auto answer
If this function is activated, a call is answered automatically from any call number during the pre-
alarm.
If the function is deactivated and an incoming or existing call is in progress during the pre-alarm, the
alarm call number is dialled at the end of the pre-alarm.

Incident:
Mandown, no movement
escape identified

Delay

Pre-alarm
with/without alarm
tone on the handset

Alarm number is dialed