Blf list key, Line keys and programmable keys – AASTRA 6730i (Version 2.5 Text Keypad) User Guide EN User Manual

Page 72

Model 6730i IP Phone User Guide

Line Keys and Programmable Keys

BLF List Key

(For use with the BroadSoft Broadworks Rel 13 or higher platform only)

The BLF\List feature on the IP phones is specifically designed to support the BroadSoft

Broadworks Rel 13 Busy Lamp Field feature.

This feature allows the IP phone to subscribe to a list of monitored users defined through the

BroadWorks web portal.

In addition to monitoring the idle and busy state, the BLF\List feature also supports the ringing

state. On the 6730i phone, the LED lights next to each BLF key illuminate steady to indicate the

monitored line is off-hook or unregistered. The LED goes off when the is idle. When the

monitored extension is ringing, the LED flashes.

Example

A receptionist has a 6730i running Broadsoft firmware that subscribes to a list of extensions

from the BroadWorks Application Server. On the 6730i running Broadsoft firmware, the key

LEDs illuminate either flashing, solid, or turn off depending on the state of those extensions.

Note:

Your System Administrator must have BLF List enabled on the

BroadWorks Server. Contact your System Administrator for more information.

Note:

You can use a BLF\List configured key to dial out.

Note:

The Broadworks BLF feature is not the same as the Broadworks Shared

Call Appearance (SCA) feature and does not permit call control over the
monitored extension.