Line keys and programmable keys – AASTRA 6730i (Version 2.5 Text Keypad) User Guide EN User Manual
Page 58
50
Model 6730i IP Phone User Guide
Line Keys and Programmable Keys
Programmable keys can also be set up to quickly to access features such as Call Return (*69) or
Voicemail.
The following paragraphs describe how to configure each function listed in the previous table.
Flash
Indicates the key is set to generate a flash event when it is pressed on the 6730i.
The IP phone generates flash events only when a call is connected and there is
an active RTP stream (for example, when the call is not on hold).
Sprecode
Indicates the key is configured to automatically activate specific services offered
by the server. For example, if the sprecode value of *82 is configured, then by
pressing the Sprecode key, *82 automatically activates a service provided by the
server. Contact your System Administrator for available services.
Park
Indicates the key is configured to park incoming calls when pressed.
Pickup
Indicates the key is configured to pick up parked calls when pressed.
Last Call Return (lcr)
Indicates the key is configured for “last call return” when pressed.
Call Forward
Indicates the key is configured as a Call Forward key. When pressed, the IP
Phone UI displays the Call Forward menus.
BLF/Xfer
Indicates the key is configured as a simplified BLF key and a transfer key. You
can use this key to perform the BLF function, or you can use it as a transfer key
to transfer calls.
Speeddial/Xfer
Indicates the key is configured as a simplified speeddial key and a transfer key.
You can use this key to perform speeddial functions, or you can use it as a
transfer key to transfer calls.
Speeddial/Conf
Indicates the key is configured as a speeddial key and a conference key. You
can use this key to speeddial from within a conference call, and add the new call
directly to the conference.
Directory
(Key 7 by Default)
Indicates the key is configured to access the Directory List.
Intercom
Indicates the key is configured to be used for intercom calls.
Services
(Key 8 by Default)
Indicates the key is set to access Services, such as, Directory List, Callers List,
Voicemail, or any other XML applications set up by your System Administrator.
Phone Lock
Indicates the key is configured as a phone lock key, allowing you to press this
key to lock/unlock the phone.
Paging
Indicates the key is configured as a Paging key. When pressed, the phone can
send Real Time Transport Protocol (RTP) streams from a pre-configured
multicast address without involving SIP signaling. You can also receive RTP
streams from pre-configured multicast addresses (can specify up to 5
addresses) using the "Paging Listen Addresses" at the path,
Basic Settings->Preferences->Group Paging RTP Settings in the Aastra Web
UI. For more information about setting this parameter, see
.
Note:
Quick access features like Call Return and Voicemail must first be configured
on your PBX in order to work on your phone. See your System Administrator for
more information.
Key Function
Description