Transferring two existing calls, Handling calls, Model 6730i ip phone user guide – AASTRA 6730i (Version 2.5 Text Keypad) User Guide EN User Manual
Page 117
Model 6730i IP Phone User Guide
109
Handling Calls
Use the following procedure to transfer a call to another extension. Use the following illustration
as a reference.
1. Connect to Party 1 (if not already connected). Party 1 is the party you want to transfer.
2. Press the Transfer Key
. You should hear a dial tone as a second line opens up.
3. Dial the extension number (or the outside number) for Party 2. This is the Party for which you
want to transfer Party 1.
4. To complete a "blind" transfer, press the Transfer Key
again before the receiving end
answers. To complete a consultive transfer, remain on the line to speak with the Party 2, before
pressing the Transfer Key
again to transfer Party 1 to Party 2. To cancel the transfer,
select Cancel on the display screen.
Transferring Two Existing Calls
The 6730i allows you to perform a transfer of a call when there are currently two active calls on
the phone. For example, on your phone, there are two active calls - Call A and Call B. Call B is on
hold. You can perform the following to transfer Call A to Call B:
1.
Press Xfer key. A new line opens.
2.
Press or scroll to the Line where Call B is on hold.
3.
Press Xfer key.
Call A is transferred to Call B.
IP Phone UI
Callers
Conf.
Transfer
Transfer
Key
Transfer
Transfer
Transfer
Transfer
Transfer
Transfer