AASTRA 600c_d for SIP-DECT User Manual EN - Manual (Page 80)

74
Key programming
The three sidekeys (left) and the hotkey (right) can be programmed as before. These programmed
keys can be used in the handset’s idle state and call connection state.
A programmed left or right navigation key can also be used in the handset’s call connection state,
but only if their programming differs from the factory setting with the setting Info and Profile.
Once you have programmed the keys, the icon for the programmed function is indicated on the dis-
play (does not apply to the Hotkey). All you need to call up the function is a short keypress.
Note
Please note that some functions can only be displayed in the connected state. For instance if you call
up the call list, you can browse through it and edit it, but you cannot dial a call number directly from
the list.
Programming (general)
Press the respective key and hold it for a moment or use the Menu ❯❯❯ ->
Settings -> Key pro-
gramming (see page 63).
The following selection is offered:
If you press the softkey during key programming, you obtain the default key of the factory set-
ting. Press Ok to accept it.
No function The key is not assigned.
VIP list The key is assigned with a number list (max. 6 entries).
Alarm clock You can program entry to the alarm clock settings.
Appointment You can program entry to the appointment settings.
Profile The selection of profiles is offered.
Info
The Info menu (caller list, redial,...) can be programmed.
New info If there are new messages or new calls for example on the caller
list, the list entries are called up directly using the programmed
key.
Caller list The caller list is accessed.
Redial list The redial list is accessed.
Voice box/Voice messages (only on Aastra 650c with Easy / Icon menu structure)
Assigns the key with the selection of the voice memory.
Text messages Assigns the key with access to the menu for text messages (when
available on your system).
Jobs Assigns the key with the Jobs list (where available on your system).