AASTRA 600c_d for SIP-DECT User Manual EN - Manual (Page 38)

32
Basic functions
Deregister / rename
Select in the menu ❯❯❯ -> Settings -> Bluetooth -> Register headset -> [Headset name] ❯❯❯ ->
Delete / Edit.
Telephoning via the Bluetooth headset
Answering a call:
Press the "Connect key" on the headset or the green call key on the handset. The
symbol is dis-
played.
Ending a call:
Press the "End key" on the headset or the End key
on the handset.
Making a call:
Enter the call number on the handset and press the "Connect key" on the headset or the green call
key on the handset.
Hands-free operation:
If you press the hands-free key
to answer a call or during a call, Bluetooth operation is interrup-
ted and the handset's loudspeaker/microphone is activated.
Answering a call on the headset:
During a call on the handset: Press the Connect key on the headset.
Transferring a call on the handset:
During a call on the headset: Press ❯❯❯ and select
Transfer BT to handset.
For details of additional headset functions, please refer to the User's Guide for the device.
Note
If Bluetooth has been programmed on one of the keys, then pressing it carries out the following
functions.
•
Handset in idle status: Calls up the Bluetooth menu.
• During a call on the handset: Transfers the connection to the headset or back to the handset.
• If a Bluetooth connection is interrupted because you have exceeded its operating range, you can
restore the connection by switching the headset off and back on again (once you are back wit-
hin range).