AASTRA 600c_d for SIP-DECT User Manual EN - Manual (Page 37)

31
Basic functions
Delete
Deletes the entry.
Delete all
Deletes the entire list.
Edit system lists
The system’s redial list and caller list usually offers you the following options:
Pressing the
C-key briefly: Deletes the selected entry.
Pressing and holding down the C-key: Deletes the list.
Pressing Ok: Displays details about the entry.
Using the Bluetooth ® headset
(not Aastra 610d, 612d)
The Bluetooth ® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such
marks by [licensee name] is under license. Other trademarks and trade names are those of their
respective owners.
The Bluetooth feature of the handsets allows registration of two Bluetooth headsets, one of which
can be selected for use.
A registered and accessible
Bluetooth headset ( symbol) has priority over any other headset also
connected via cable ( symbol).
If the hands-free operation key is pressed when a headset is being used ( Bluetooth or connected via
cable), the call is forwarded to the handset loudspeaker.
If the connection between the handset and
Bluetooth headset is lost during a call, a message appe-
ars on the display. You can decide whether you want to continue the call with a headset connected
via cable if necessary, or on the handset itself, or to terminate the call.
Registration
Switch the headset to "Pairing mode". Follow the User's Manual of the headset for this.
Switch on the function in Menu ❯❯❯ ->
Settings -> Bluetooth -> BT Status die Funktion ein (An).
Open the Menu ❯❯❯ -> Settings -> Bluetooth -> Subscribe headset and then press the New soft-
key.
The headset that is found is shown by its name on the display. Confirm the display with
Ok and enter
the PIN of the headset. The headset is now logged in and the symbol appears on the top line of
the display.
You can specify the active headset in the Menu ❯❯❯ ->
Settings -> Bluetooth -> Select headset.