AASTRA 6700i for Aastra 800 and OpenCom 100 User Guide EN - Manual (Page 29)

Main Menu on the Aastra 673xi / 675xi SIP Telephone
27
6 Connections
The following features are executed if the current connection state of your telephone
permits.
1 Call pick-up
1 Pick-up: You pick up the call intended for another telephone in your pick-up
group.
If the called subscriber belongs to a user group with pick-up protection
activated, you cannot pick up calls for that person's call number.
2 Pick-up select. (pick-up selective): After entering the call number, you pick
up the call for any other telephone.
If the called subscriber belongs to a user group with pick-up protection
activated, you cannot pick up calls for that person's call number.
Note: If the other telephone is already in the call state (e. g. an answering
machine is making an announcement), you can pick up the call with “Pick-
up select.”. The subscriber for whom you picked up the call must belong to a
user group for which “Call removal” authorisation is activated, otherwise “Pick-
up select” is not possible.
3 Take: You wish to take a current call from one terminal over to your tele-
phone and continue the call on the telephone. To be able to do so, your
telephone and the other terminal have to have the same internal call
number.
2 Dial
1 Announcement: You direct an announcement to other system terminals.
Under Dest: you enter the call number and press the Enter softkey.
Announcements can be configured on the following terminals: corded
Aastra 677x, OpenPhone 6x/7x type system telephones and DECT
Aastra 6x0d, Aastra 142d, OpenPhone 26/27/28 type system tele-
phones.
Announcements can also be directed to call numbers where multiple
subscribers can be reached (e.g. a hunt group call number).
Note: If a called subscriber has announcement protection on, this
feature is not executed.