AASTRA 6700i for Aastra 800 and OpenCom 100 User Guide EN - Manual (Page 19)

Using the Aastra 673xi / 675xi
17
Speed Dialling
You can save call numbers either to the function keys or to the number keys of your
telephone as speed dialling destination.
Speed Dialling with Function Keys
If the administrator of the OpenCom 100 / Aastra 800 communications system has
programmed speed dialling destinations:
• Pick up the handset and press the function key where the speed dialling desti-
nation is programmed.
alternatively – when you wish to call in the handsfree mode:
• Press the function key – with the handset down – where the speed dialling desti-
nation is programmed.
Speed Dialling with Number Keys
Select speed dialling destination
• Pick up the handset. Press the number key where the desired call number is saved
for a few seconds.
alternatively – when you wish to call in the handsfree mode:
• Press the number key – with the handset down – where the speed dialling desti-
nation is programmed.
Configuring a speed dialling destination
You can configure the number keys as speed dialling keys directly on your
Aastra 673xi / 675xi:
1. Press one of the number keys for a few seconds.
Aastra 6755i / 6757i: The display shows the Enter Number: menu card.
Aastra 6730i / 6731i and Aastra 6753i: The display shows Speeddial-> Enter
Number. Confirm with the down arrow key.
2. Enter the destination call number using the number keys. To correct a mistaken
number use the Backspace function key. Slide the cursor horizontally with the left
arrow key
or right arrow key .