Garmin G1000 Socata TBM 850 - Manual (Page 47)

190-00709-01 Rev. A Garmin G1000 Pilot’s Guide for the Socata TBM 850 35
SYSTEM OVERVIEW
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EAS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL
FEA
TURES
APPENDICES
INDEX
Figure 1-32 System Setup Page
MFD Data Bar
Fields Box
GPS CDI Box
COM
Configuration
Box
Nearest
Airports Box
Date/Time Box
Display Units
Box
Audio Alert Voice
Selection
Pilot Profile
Setup
Airspace
Alerts Box
Select Waypoint
Arrival Alert
Flight Director
Command Bar Format
Select Baro
Transition Alert
CDI and Altimeter
Baro Sync
D
ate
/t
ime
The Date/Time Box on the System Setup Page displays the current date and time and allows the pilot
to set the time format (local 12-hr, local 24-hr, or UTC) and offset. The time offset is used to define
current local time. UTC (also called “GMT” or “Zulu”) date and time are calculated directly from the GPS
satellites signals and cannot be changed. When using a local time format, designate the offset by adding or
subtracting the desired number of hours.
To set the system time format:
1) While on the System Setup Page, press the FMS Knob momentarily to activate the flashing cursor.
2) Turn the large FMS Knob to highlight the time format field in the Date/Time Box.
3) Turn the small FMS Knob to select the desired system time format (local 12hr, local 24hr, UTC) and press the
ENT Key.
To set the current time offset:
1) While on the System Setup Page, press the FMS Knob momentarily to activate the flashing cursor.
2) Turn the large FMS Knob to highlight the time offset field in the Date/Time Box.
3) Turn the FMS Knobs to enter the time offset and press the ENT Key.