Garmin G1000 Socata TBM 850 - Manual (Page 33)

190-00709-01 Rev. A Garmin G1000 Pilot’s Guide for the Socata TBM 850 21
SYSTEM OVERVIEW
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EAS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL
FEA
TURES
APPENDICES
INDEX
SENSOR Displays softkeys for selecting the #1 and #2 AHRS and Air Data
Computers
ADC1 Selects the #1 Air Data Computer
ADC2 Selects the #2 Air Data Computer
AHRS1 Selects the #1 AHRS
AHRS2 Selects the #2 AHRS
PFD Displays second-level softkeys for additional PFD configurations
SYN VIS Displays the softkeys for enabling or disabling Synthetic Vision
features
PATHWAY Displays rectangular boxes representing the horizontal and
vertical flight path of the active flight plan
SYN TERR Enables synthetic terrain depiction
HRZN HDG Displays compass heading along the Zero-Pitch line
APTSIGNS Displays position markers for airports within approximately
15 nm of the current aircraft position. Airport identifiers are
displayed when the airport is within approximately 9 nm.
DFLTS Resets PFD to default settings, including changing units to
standard
WIND Displays softkeys to select wind data parameters
OPTN 1 Wind direction arrows with headwind and crosswind
components
OPTN 2 Wind direction arrow and speed
OPTN 3 Wind direction arrow with direction and speed
OFF Information not displayed
DME Displays the DME information window
BRG1 Cycles the Bearing 1 Information Window through NAV1, GPS/
waypoint identifier and GPS-derived distance information, and
ADF/frequency.
HSI FRMT Provides access to the HSI formatting softkeys
360 HSI Displays the HSI in a 360 degree view
ARC HSI Displays the HSI as an arc
BRG2 Cycles the Bearing 2 Information Window through NAV2 or GPS
waypoint identifier and GPS-derived distance information, and
ADF/frequency.
ALT UNIT Displays softkeys for setting the altimeter and BARO settings to
metric units
METERS When enabled, displays altimeter in meters
IN Select to display the BARO setting as inches of mercury
HPA Select to display the BARO setting as hectopacals
STD BARO Sets barometric pressure to 29.92 in Hg (1013 hPa if metric units
are selected)