Tis alerts, Hazard avoidance – Garmin G1000 Socata TBM 850 User Manual
Page 396
Garmin G1000 Pilot’s Guide for the Socata TBM 850
190-00709-01 Rev. A
384
HAZARD AVOIDANCE
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EAS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL FEA
TURES
APPENDICES
INDEX
Or
:
a)
Press the MENU Key.
b)
Select ‘Operate Mode’ (shown if TIS is in Standby Mode) and press the ENT Key.
Display
of System
Status
Figure 6-98 Traffic Map Page
Non-Threat
Traffic
Traffic Advisory,
Off Scale Aircraft
is Out of Range,
200’ Above and
Descending
Traffic Advisory, Aircraft
is 400’ Below and
Climbing
Non-Bearing Traffic (System is Unable to
Determine Bearing), Aircraft Distance is 8.0
nm, 1100’ Above and Descending
Operating
Mode
Mutes “TIS Not
Available” Voice
Alert
TIS ALERTS
When the number of TAs on the Traffic Map Page increases from one scan to the next, the following occur:
• A single “Traffic” voice alert is generated.
• A ‘TRAFFIC’ Annunciation appears to the top left of the Attitude Indicator on the PFD, flashing for 5 seconds
and remaining displayed until no TAs are detected in the area.
• The PFD Inset Map is automatically displayed with traffic.
To reduce the number of nuisance alerts due to proximate aircraft, the “Traffic” voice alert is generated only
when the number of TAs increases. For example, when the first TA is displayed, a voice and visual annunciation
are generated. As long as a single TA remains on the display, no additional voice alerts are generated. If a second
TA appears on the display or if the number of TAs initially decreases and then subsequently increases, another
voice alert is generated.