Garmin GPSMAP 5215 - Manual (Page 52)

48 GPSMAP ® 4000/5000 Series Owner’s Manual
Almanac, Environmental, and On-boat Data
Selecting the Engine Gauge Type
You can set the type of gauges that appear on the first engine gauge page. If you have one or two engines, you
can view either analog or digital gauges. If you have three or more engines, you can view only digital gauges.
From the Home screen, select information > engines > Menu > Gauge Setup > Style.
Digital Gauges Analog Gauges
Selecting the Number of Engines Shown in Gauges
The digital engine gauges can show information for up to four engines. The analog engine gauges can show
information for up to two engines.
1. From the Home screen, select information > engines > Menu > Gauge Setup > engine Selection >
Num. engines.
2. Select the number of engines.
3. Complete an action:
• Select Back.
• Complete steps 2 and 3 of “Selecting the Engines Shown in Gauges” (
page 48 ) to select the engines for
which information appears in the gauges.
Selecting the Engines Shown in Gauges
You must manually select the number of engines shown in the engine gauges ( page 48 ) before you can select
the engines for which information appears in the gauges.
1. From the Home screen, select information > engines > Menu > Gauge Setup > engine Selection.
2. Select First engine.
3. Select the engine for which you want to view information in the first gauge or bar.
For example, if you select “Engine 2,” the first engine gauge or bar shows information for the engine
identified as “Engine 2” on the NMEA 2000 network.
4. Repeat steps 2 and 3 for the second, third, and fourth engine gauge or bar, as needed.
5. Select Back.