Making an individual routine call to an ais target, Making an individual routine call to an ais, Target – Garmin GPSMAP 5215 User Manual
Page 105
GPSMAP
®
4000/5000 Series Owner’s Manual
101
Digital Selective Calling
1. From the Home screen, select information > DSC List.
2. Select a vessel or a station to call.
3. Select Review > Call with Radio > Send.
The chartplotter sends information about the call to the radio.
4. On your Garmin VHF radio, select Call.
Making an Individual Routine Call to an AIS Target
When you connect your Garmin chartplotter to a Garmin VHF NMEA 2000-compatible radio, you can use
the chartplotter interface to set up an individual routine call to an AIS target. Before you start the call, you can
select a DSC channel other than the default channel, channel 72 (
).
1. From the Home screen, select Charts.
2. Select a chart or a 3D chart view.
3. Complete an action:
• For the GPSMAP 4000 series, use the Rocker to select an AIS target .
• For the GPSMAP 5000 series, touch an AIS target .
4. Select AiS Vessel > Call with Radio > Send.
The chartplotter sends information about the call to the radio.
5. On your Garmin VHF radio, select Call.