ASRock FM2A85X Extreme6 - Manual (Page 29)

29
ASRock FM2A85X Extreme6 Motherboard
English
Serial port Header This COM1 header supports a
(9-pin COM1) serial port module.
(see p.2 No. 31)
HDMI_SPDIF Header HDMI_SPDIF header, providing
(2-pin HDMI_SPDIF1) SPDIF audio output to HDMI
( see p.2 No. 32) VGA card, allows the system to
connect HDMI Digital TV/
projector/LCD devices. Please
connect the HDMI_SPDIF
connector of HDMI VGA card to
this header.
ATX 12V Power Connector Please connect an ATX 12V
(8-pin ATX12V1) power supply to this connector.
(see p.2 No. 1)
Though this motherboard provides 8-pin ATX 12V power connector, it can still work
if you adopt a traditional 4-pin ATX 12V power supply. To use the
4-pin ATX power supply, please plug your power supply along with
Pin 1 and Pin 5.
4-Pin ATX 12V Power Supply Installation
4 8
1 5
4 8
1 5
Chassis Intrusion Header This motherboard supports
(2-pin CI1) CASE OPEN detection feature
(see p.2, No. 30) that detects if the chassis cover
has been removed. This feature
requires a chassis with chassis
intrusion detection design.
XFire Power Connector It is not necessary to use this
(4-pin CROSS_FIRE_PWR1) connector, but please connect it
(see p.2 No. 42) with a hard disk power
connecor when two graphics
cards are plugged to this
motherboard.
CROSS_FIRE_PWR1