ACU-RITE VRO 300M - Manual (Page 51)

Setup VRO 300M
44
Job Setup
Tool Library
A list of tools is available to you for convenient selection during programming
and/or operation of the
VRO 300M
. There are 100 “slots” in the Tool Library.
You can organize tools any way you wish.
To add a tool to the tool library, select an unused slot and press the
ENTER
key. Fill in the diameter, length, units and the type
(press the
TOOL TYPES softkey for the list of available
types). Press DONE
to enter the tool into the
library.
To change an existing tool, move to that tool and
press
ENTER
. Make any changes and press DONE .
The changed tool will now appear in the library.
You can sort the tool library by tool number (so you can see them in
numerical order) or by type (so you can see all your drills together) by
pressing the
SORT BY
NUMBER
or SORT BY TYPE softkeys. When you do this, the unused tool
slots are not shown. To see them again, press DONE or CANCEL to return to
the
JOB SETUP
menu, then select
TOOL LIBRARY
again.
TOOL LIBRARY (DIAMETER / LENGTH)
7 OF 99
02 0.2498 / 0.000 INCH BL END ML
01 0.2000 / 1.205 INCH FL END ML
00 0.2000 / 0.000 INCH EDGE FNDR
03 0.1075 / 0.000 INCH BL END ML
04 0.375 / 0.000 INCH DRILL
05 1.000 / 0.000 INCH DRILL
06
07
08
09
10
11 1.000 / 0.000 INCH BROACH
12
13
TOOL DESCRIPTION
SIZE
DIA
LEN
.3750
1.25
UNITS
INCH
TYPE
FL END ML