ACU-RITE VRO 300M - Manual (Page 37)

Program Operations VRO 300M
30
Rectangular Frame
A frame step lets you mill a rectangular shape.
The frame is defined by its lower left corner and
its size. You can use this step to specify the edge
of a pocket.
C
ORNER
—enter the lower left corner location.
S
IZE
—enter the width and height of the rectangle.
D
EPTH
—enter the depth.
D
IRECTION
—decide between conventional milling
and climb milling using the CW and CCW
softkeys.
F
RAME
T
YPE
—select the tool offset directions using
the softkeys. You can mill a pocket if you use the
inside offset.
RECT FRAME
CORNER
X
Y
ABS
ABS
DEPTH
Z ABS
DIRECTION
CW
FRAME TYPE
INSIDE
SIZE
X
Y
SIZE Y
SIZE X
DEPTH
SIZE Y
SIZE X
DEPTH
SIZE Y
SIZE X
OUTSIDE FRAME INSIDE FRAME CENTER FRAME