ACU-RITE VRO 300M - Manual (Page 22)

VRO 300M Readout Operations
15
X
ENTER X 0.000 INCR
2.0
ENTER
X 2.250 INCR
X 1.125 INCR
CENTERLINE
Sets an incremental
zero at the tool
location.
Calculates the center
point, and sets an
incremental zero there.
Center-line Presets
You can set a preset at the center of a workpiece, or in the center of a hole.
Presetting Using the POS Key
You can enter a preset using the POS key for as many as four axes at
once. Refer to page 25 for information on how to complete the Position Step.
When you have completed it, press the
RUN softkey to execute the preset
operation.
…then to the second edge
Move to the first edge…