Activeforever Invacare Tracer IV Wheelchair - Manual (Page 51)

SECTION 11—OPTIONS
Part No. 1110558 51 Tracer ® IV
Installing the Seat Positioning Strap
ƽ WARNING
ALWAYS wear your seat positioning strap. Inasmuch as the seat positioning strap is
an option on this wheelchair (you may order with or without the seat positioning
strap), Invacare strongly recommends ordering the seat positioning strap as an
additional safeguard for the wheelchair user. The seat positioning strap is a
positioning strap only. It is not designed for use as a safety device withstanding high
stress loads such as auto or aircraft safety belts. If signs of wear appear, strap MUST
be replaced IMMEDIATELY.
NOTE: For this procedure, refer to FIGURE 11.3.
1. Remove the bottom back upholstery screw from the wheelchair.
2. Position the seat positioning strap half between the back cane and back upholstery.
3. Secure the back upholstery and seat positioning strap to the wheelchair with the
existing back upholstery screw.
NOTE: The screw MUST go through the grommet in the seat positioning strap.
4. Repeat STEPS 1-3 for the opposite side of the wheelchair.
FIGURE 11.3 Installing the Seat Positioning Strap
Back
Upholstery
Screw
Strap Positioning
Strap
Back Upholstery
Back Cane