Activeforever Stamina EMR Conversion II Recumbent Bike Rower - Manual (Page 14)

STORAGE
To store the Conversion II 9003 simply keep it in a clean dry place.
To avoid damage to the electronics meter, remove the batteries before storing the Conversion II 9003
for one year or more.
Move the Conversion II 9003 with the moving wheels on the Front Stabilizer. Grasp the Rail Cap to
move the Conversion II 9003. Do not use the Seat to move the Conversion II 9003. The Seat will
move and the Seat Carriage may pinch your hand or fingers.
Follow the following process to fold The Conversion II 9003 as illustrated for easy storage. 1.
2.
3.
4.
Adjust and lock the seat in position with at least one adjustment hole visible in front of the seat.
NOTE: This will prevent the seat from damaging the covers.
Remove the PULL PIN(63) and swing the REAR SUPPORT(62) toward the front.
NOTE: This will allow you to pull out the RELEASE KNOB(59) easily.
Pull out the RELEASE KNOB(59) and fold up the RAIL(52). Make sure the RAIL(52) is locked
securely in folded position by RELEASE KNOB(59).
Lock the REAR SUPPORT(61) in folded position with the PULL PIN(63).
B
15
D
A
C
B
A
UNFOLD THE Conversion II 9003
Pull out the RELEASE KNOB(59) and unfold the RAIL(52). Make sure the RAIL(52) is locked securely
in the unfolded position by RELEASE KNOB(59).
Remove the PULL PIN(63) and swing the REAR SUPPORT(62) backward, then lock the REAR
SUPPORT(61) in position with the PULL PIN(63). a.
b.
Grasp Here
To Move
a.
b.
c.
d.