Acroprint AcroComm - Manual (Page 46)

AcroComm Programming Manual
6.2.51. SN
Message that will be constantly displayed on the second line of the clock’s
screen as the company’s ID,:
Format: SN=XXXXXXXXXXXXXXXXXXXX
where XXX... string up to 20 characters.
The clock’s screen has two lines of 20 characters each. This string will be
displayed on the second line.
6.2.52. SOT
Start Online Transaction transmission mode
Format: SOT
This instruction sets the terminal in online transmission mode if OT is
different than 0. (See OT for more details.)
6.2.53. SP
Supervisor Badge Prefix
Format: SP=XXXX...
where XXXX... is the prefix that a badge must have to be considered a
Supervisor Badge.
6.2.54. T#
Clock’s Logical ID
Format: T#=X
where X is the character that identifies the clock.
6.2.55. T1
General Data Entry Time
Format: T1=NNN
where NNN are the tenths of second the clock will wait for an entry.
Default is 30 (3 seconds).
6.2.56. T3
Message Display Time
Format: T3=NNN
where NNN are the tenths of second the clock will display a message on
screen.
6.2.57. TA
Please Try Again Message
Format: TA=XXXXXXXXXXXXXXXXXXXX
where XXX…up to 20Characters: The default is “PLEASE TRY AGAIN.”
46