Acroprint AcroComm - Manual (Page 15)

AcroComm Programming Manual
1.13. Reset
Before this instruction is executed, the user must make sure that the transactions were
successfully polled. This function tells the terminal to erase ALL transactions stored.
The program will ask for confirmation before sending the instruction to initialize.
1.14. Modem Dial
If you had selected “Communications via Modem” in Communications Setup, the
following two fields will be available, “Modem Dial” and “Modem Hang Up.” Select
Dial Mode and Phone Number to dial. Example: 9,, 5554222. The commas add a delay
between obtaining an outside line and dialing the number. When communication with
the modem terminal is achieved, a new menu will appear on the screen; it will have all
the options described above.
15