Rmc 7135, Appendix c specifications – Acnodes RMC 7135 User Manual

Page 97

661 Brea Canyon Rd., Suite 3

Walnut, CA 91789

tel: 909.598.7388, fax: 909.598.0218

are subject to change without notice. For latest product information,

please visit Acnodes’ web site at www.acnodes.com.

RMC 7135

1U Rackmount System

Processors

Single Intel® Xeon® 5500 Series processors below 100W

Note: Please refer to the motherboard specifications pages on our web site for updates on supported
processors.

Chipset

Intel X58/ICH10R chipset

BIOS

4 Mb AMI SPI Flash ROM

Memory Capacity

Six 240-pin DIMM slots that can support up to 24 GB of unbuffered ECC/non- ECC DDR2-1333/1066/
800 SDRAM

Note: See the memory section in Chapter 5 for details.

SATA Controller

On-chip (ICH10R) 3 Gb/s Intel SATA controller

Drive Bays

Four (4) 3.5" drive bays to house four standard SATA drives

PCI Expansion Slots

One PCI-E 2.0 x16 slot

Motherboard

Model: RMC7135

Form Factor: ATX

Dimensions: 12 x 9.6 in (305 x 244 mm)

Chassis

Model: motherboard (1U Rackmount)

Dimensions: (WxHxD) 17.2 x 1.7 x 19.85 in. (437 x 43 x 504 mm)

Note: please visit our web site for information on supported operating systems

Appendix C Specifications