Rmc 7135, 7 pci expansion cards – Acnodes RMC 7135 User Manual

Page 42

661 Brea Canyon Rd., Suite 3

Walnut, CA 91789

tel: 909.598.7388, fax: 909.598.0218

are subject to change without notice. For latest product information,

please visit Acnodes’ web site at www.acnodes.com.

RMC 7135

1U Rackmount System

5-7

PCI Expansion Cards

The RMC7135 chassis uses a riser card to accommodate one add-on card (CSE- RR1U-E16 for a
PCI-E x16 card.

Installing a PCI Expansion Card

1. After powering down the system, remove the PCI slot shield.

2. Fully seat the riser card into the slot, pushing down with your thumbs evenly on both sides of the
ard.
3. Install the expansion card into the riser card.

4. Finish by using a screw to secure the top of the card shield to the chassis.

5. The PCI slot shield protects the serverboard and its components from EMI and aid in proper
ventilation, so make sure it is always in place.