Rmc 7135 – Acnodes RMC 7135 User Manual
Page 12
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2005 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
RMC 7135
1U Rackmount System
1-2
Motherboard Features
At the heart of the Acnodes RMC7135 lies the embedded board, a single processor mother- board
based upon Intel's X58 chipset. Below are the main features of the embedded board.
Processor
The embedded board supports single Intel® Xeon® 5500 Series processors below 100W. Please
refer to the motherboard specifications pages on our web site for updates on supported processors.
Memory
The embedded board has six 240-pin DIMM slots that can support up to 24 GB of unbuffered
ECC/non-ECC DDR2-1333/1066/800 SDRAM.
Onboard SATA
A SATA controller is built in to the ICH10R portion of the chipset to provide support for a six port, 3
Gb/sec Serial ATA subsystem. The SATA drive is not hot-swappable units.
PCI Expansion Slots
The embedded board has one PCI-E 2.0 x16 slot for use in the RMC7135 server. The PCI-E slots may
be populated with a riser card (included).
Onboard Controllers/Ports
An onboard IDE controller supports one floppy drive. Onboard I/O backpanel ports include one COM
port, a VGA port, two USB ports, PS/2 mouse and keyboard ports and four Gigabit LAN (NIC) ports.
Other Features
Other onboard features that promote system health include voltage monitors, a chassis intrusion
header, auto-switching voltage regulators, chassis and CPU overheat sensors, virus protection and
BIOS rescue.