Acnodes KDM 7178 - Manual (Page 45)

KDM series User’s Manual
40
CAT5 Module
CAT5 Remote Console
Installation: Power off the KVM switch firstly. Remove the cover of the add-on
slot, slide in the CAT5 transmitter module and make sure the module is fully
inserted into the slot.
To extending your console up to 1000 feet away by connecting the CAT5 cable
to the R-Box in the remote end.
Figure 2-7. CAT5 Module Installation
2.4 Power ON
Check connections and plug in power supply
Double check whether all cables/connectors are properly connected. You can
check the color of keyboard and mouse connector to make sure the keyboard
and mouse cables go to the correct ports.
Plug the power supply to the KVM switch and plug the AC power plug into the
electrical receptacle. Now you will see the LED of Port 1 lights up, and hear a
beep sound.