Accusys ExaSAN SWF16 - Manual (Page 69)

4. How to Use
User Guide Page 4-20
When users click “Temperature” icon, the web GUI would pop up a window as following
Figure 74: Temperature
4.6 SANit FS configuration
Figure 75: Click SANit FS
When you click the right side of the main screen, you can enter SANit FS configuration
menu as following
Select Language, enter User Name (Default user name is admin) and Password (Default
password is 00000000,”eight zeros”), and then click Log In. See below.
Note
User cannot change the default user name but password. If you
forget your changed password, you could push the reset button in
back of the SWF16 for 13 seconds to go back the default setting.
Please refer to the section 1.4.1.4 for more detailed info.
Caution:
If you push reset hold but not disconnected the all clients, you might
damage your important data in the SAN environment.