2 installing the installer package, 1 installing on mac and windows, Installing the installer package – Accusys ExaSAN SWF16 User Manual
Page 40: Installing on mac and windows, Figure 27: windows installer package

3. Installation
User Guide
Page 3-8
3.3.2 Installing the installer package
The installer package can be downloaded from the Accusys website. Go to the
Accusys support page (http://www.accusys.com.tw/support/download.html) for
available downloads. Or you can find it from the ExaSAN installation DVD. If you need
more info or tech support, please contact your system integrator of ExaSAN product or
Accusys FAE Dept. (see Appendix C “Customer Service and Technical Support” for
more information)
3.3.2.1 Installing on MAC and Windows
1. Insert the installation DVD into the DVD drive of the MAC or PC.
2. For Macs, unzip and execute “DVD-ROM/ExaSAN/For SAN/SWF16/Installer
package/Mac Installer/Accusys_IP_Mac_NT_x.x.x.zip ".
For PCs, unzip and execute “DVD-ROM/ExaSAN/For SAN/SWF16/Installer
package/Windows Installer/Accusys_IP_Mac_NT_x.x.x.zip”.
Figure 27: Windows installer Package
Note
After you install the installer package completely, you’ll see
“RAIDGuard X” icon in the host. “RAIDGuard X” is a powerful tool
which supports remote monitoring of multiple controllers that are
connected to the same network. If you want to configure your
storages in advance, you can use RAIDGuard X to do so. If you just
need the basic function to setup your storages, you can use
ExaSAN switch web GUI to do so. Please refer to the section “4.
Using ExaSAN switch web GUI”. The detailed using information of
RAIDGuard X, please refer to your storage’s (A12S2-PS, B08S2-PS,
etc…) user’s manual.
3. Follow the onscreen instructions. Sample screens shown below are from a Windows
installation.