Accusys ExaSAN SWF16 - Manual (Page 21)

1. Introduction
User Guide Page 1-11
1.4.1.3 Mirror device Indicators
Figure 11: front view of mirror device
Table of LED Status
Status indicator Access indicator Disk status
Green Off Disk is properly installed
Green On/flash (Yellow) Disk is being accessed
Red Off No disk installed or disk failure
Flash (Red/Green) On/flash (Yellow) Disk is rebuilding
Note:
A beeper will sound to indicate status. A slow beep indicates data rebuilding. A
fast beeping sound will indicate an error or disk failure. See below:
Sound of beeping System Status
Bi~~ System boot up and ready
bi—bi—bi—bi…and so on MetaData rebuilding
bi-bi-bi---bi-bi-bi… and so on One SSD has failed