4 connecting the switch lan and power cord, Connecting the switch lan and power cord – Accusys ExaSAN SWF16 User Manual
Page 37

3. Installation
User Guide
Page 3-5
Figure 22: Connecting the PCIe QSFP cable to the client port
3.1.4 Connecting the switch LAN and power cord
1. Insert the Ethernet cable into eth0 (management port) and eth1 (private port for
MDC) on the SWF16. The default IP addresses are 192.168.0.25 and 192.168.1.25.,
respectively.
Figure 23: Connecting the Ethernet cable to eth0 and eth1
2. After connecting the Ethernet cables, please connect the power cords to the both
power supply modules.
Figure 24: Connecting the power cords to the power supply module
Note