Configuring the raid system, Figure 1-3 raid system with jbod expansion, Jbod system – Accusys ExaRAID A24U-SJ User Manual

Page 26

JBOD System

Quick Start Guide

Configuring the RAID System

Figure 1-3 shows an example of a RAID system (A16R-FS) connected to

three JBODs.

To establish the connection, follow the procedures below:
1.Connect the RAID system and the JBOD enclusures following the

2.Connect the RAID system to the host server using fibre cables as shown.
3.Connect controller A and controller B of the RAID system to the LAN

switch.

Note

The same procedures apply to A16R-SS RAID system using SAS

connectors.

TV OUT

A16R-SJ
ID : 2

A16R-SJ
ID : 3

A16R-SJ
ID : 1

A16R-FS/SS
ID : 0

Fibre Card 2

Fibre Card 1

LAN Switch

Host Sever

Figure 1-3 RAID system with JBOD expansion