Carrier 42XQ_42XQA - Manual (Page 21)

20
FAN ONLY mode
“UP” and “DOWN”
buttons
Selecting the desired temperature
FAN ONLY
Operation with fan ventilation only
NOTE
• Press the buttons “UP” - hotter, or
“DOWN” - colder, to change the
temperature.
• The maximum temperature of the
device is 32 o C (90 o F) and the
minimum temperature is 17 o C (63 o F).
Whenever the set point is being displayed,
the “SET TEMP” icon is illuminated.
Whenever the display mode changes from
o F to o C, the setpoint is set to the default
start-up values of 22 o C for “ o C” mode and
72 o F for “ o F” mode.
If the air sensor embedded in the remote
control is activated, the display shows the
ambient temperature after a few seconds.
“FAN” button
Setting the fan speed.
When the “FAN” button is pressed, the fan
speed is changed.
To reach the desired speed, the “FAN”
speed button must be pressed and then
released.
Low, Medium,
High or Auto.
The icon on the display shows that a
change has occurred.
NOTE
• The setting of the AUTO mode is
shown by the flashing of the medium
and High speed icons of the fan.
Low
Medium
High
Auto (automatic)
The fan speed changes
automatically from the
requested value to an ideal
temperature. When this
function is activated, the
dotted symbols flash.
(up)
(down)