Carrier 42XQ_42XQA User Manual

Page 16

If you want the daily operating mode to start
at 5:30pm and stop at 10:30pm, proceed
as follows:

1. Select timer ON for 5:30pm
2. Select timer OFF for 10:30pm
3. Press the button of the daily operating

mode (Button )

Canceling the ON, OFF and DAILY
TIMER programming

1. If you want to cancel the selection of

ON or OFF timer, press the buttons,
following this sequence:
• Button or
• Button X

To deactivate the daily operating mode
function, press button

NOTE

• The daily operation function will remain

active until one of the two timers (ON or
OFF) is activated.

Programming the night timer
(SLEEP - button )

Press this button to set the night timer
(SLEEP) with the remote control connected.
The icon appears on the display. This
procedure allows you to set the remaining
operating time of the unit.

1. “1:hr” appears on the display, together

with the icon.

2. Press button .

The display shows
t h e f o l l o w i n g
selections in the
sequence:

1 hr, 2 hr, 3 hr, 4 hr, 5 hr,
6 hr, 7 hr, 8 hr and 9 hr

3. Once you have selected - using the

buttons or - the remaining operating
hours, press button again to confirm.

4. After the night timer has been set, the

unit will check the selected temperature
to prevent excessive cooling during
operation.

Buttons for setting the time and
resetting
(Button N and O)

Press the clock setting button to adjust
the real time. Press the button “o” with a
sharp-pointed object, if the remote control
is not working properly or after replacing
the batteries.