Carrier 42XQ_42XQA User Manual

Page 13

Selecting the airflow direction
(Key H)

The airflow direction is adjusted
automatically. The deflector will
remain in the pre-selected position,
according to the operating mode.

6 different airflow directions
may be selected.

The deflector will continue to swing
downwards and upwards. The
“Swing” option guarantees an
effective and uniform distribution of
ambient air at all times.

NOTE

The deflector direction must be set so as
to optimize the ambient airflow distribution.

Press the button until one of the
following positions is displayed:

Icons appearing on the display

• In COOLING, DE-HUMIDIFICATION

and VENTILATION modes, the deflector
swings to the COOLING option.

The fan speed can be selected by pressing
the button with the icon.

Indicated symbol

Timer ON button (Button I)

Press this button even if the remote
control is turned off. The relevant icon
and the picture of the clock start
flashing. If you do not press a button
for 10 seconds, the remote control
switches itself off (it was already
switched off when the button was
pressed), or the timer function is
automatically deactivated.

Selecting the fan speed
(Key E)

Low speed
(for night operation)

Medium speed

High speed (from when the unit
is turned on until the desired
temperature is reached)

Automatic (the fan speed
changes automatically to the
value providing the best possible
comfort)

Programming the Timer
to start (ON)