HONDA 2011 Odyssey - Manual (Page 663)

Install the flat tire on the bracket
with the inside of the wheel facing
toward you. Install the tire
mounting wing bolt to the bracket
through one of the five wheel nut
holes as shown. Poke a hole in the
vinyl bag as needed. Secure the
flat tire by tightening the tire
mounting wing bolt.
Return the third row seat to an
upright position.
You will find a U-shaped carpet
piece behind the seat bottom of
the third row seat. Pull up the
U-shaped carpet piece, fold it, and
tack the end under the carpet.
Unfasten the plastic screw with a
coin.
Install the bracket and the bracket
mounting wing bolt on the
attachment point as shown, and
tighten the bolt. Make sure the
bracket is securely tightened.
Store the jack and tools in the tool
kit case, then store the case in the
spare tire well.
Store the plastic screw in a
noticeable place.
Make sure to reinstall the plastic
screw after the flat tire is repaired
and installed on the vehicle.
23.
19.
20.
21.
22.
24.
Changing a Flat Tire
660
BRACKET
CARPET PIECE PLASTIC SCREW
TIRE MOUNTING WING BOLT
BRACKET MOUNTING WING BOLT
ATTACHMENT POINT
10/07/17 11:02:38 31TK8600_665
2011 Odyssey