Installing a child seat – HONDA 2011 Odyssey User Manual
Page 53

When not using the LATCH system,
all child seats must be secured to the
vehicle with the lap part of a lap/
shoulder belt.
In addition, the lap/shoulder belts in
all seating positions except the
driver’s have a lockable retractor
that must be activated to secure a
child seat.
If you intend to install a child seat in
the center seating position of the
second and third row, make sure the
detachable seat belt is securely
latched (see page
).
You can also remove the rear head
restraints (see page
). The
removed head restraints should be
secured in the cargo area so they
will not be thrown while you are
driving. Make sure to replace the
head restraints when the child
seats are not in use.
Follow steps 6 and 7 on page
.
With the child seat in the desired
seating position, route the belt
through the child seat according
to the seat maker’s instructions,
then insert the latch plate into the
buckle and remove any slack from
the lap portion of the belt.
1.
3.
4.
Installing a Child Seat
Installing a Child Seat with a Lap/
Shoulder Belt
50
10/07/17 09:40:57 31TK8600_055
2011 Odyssey