HONDA 2011 Odyssey - Manual (Page 50)

Whatever type you have, follow
the child seat maker’s instructions
for adjusting or tightening the fit.
Other LATCH-compatible seats have
a flexible-type connector as shown
above. Lift the head restraint (see page
), then route the tether strap
through the legs of the head
restraint and over the seat-back,
making sure the strap is not
twisted.
Attach the tether strap hook to the
tether anchor, then tighten the
strap as instructed by the child
seat maker.
Push and pull the child seat
forward and from side-to-side to
verify that it is secure.
If the tether strap is too long and
cannot be tightened firmly, find a
route where the strap can be
tightened securely.
4.
5. 6.
7.
179
CONTINUED
Installing a Child Seat
Dr
iv
er
and
P
asseng
er
Saf
et
y
47
ANCHOR
TETHER
STRAP HOOK
TETHER STRAP
Flexible type
10/07/17 09:40:35 31TK8600_052
2011 Odyssey