HONDA 2011 Odyssey - Manual (Page 472)

Error Message Cause
Insert a different disc. If the new
disc plays, there is a problem with
the first disc. If the error message
cycle repeats and you cannot clear it,
take your vehicle to a dealer.
The audio system will try to play the
disc. If there is still a problem, the
error message will reappear. Press
the eject button, and pull out the disc.
If you see an error message in the
display while playing a disc, press
the eject button. After ejecting the
disc, check it for damage or
deformation. If there is no damage,
insert the disc again.
The chart on the right explains the
error messages you may see in the
display while playing a disc.
Solution
FOCUS Error
Mechanical Error
High Temperature
Invalid region code
DVD format not
supported
Mechanical Error
Press the disc eject button, and remove the disc.
Check for an error indication. Insert the disc
again. If the code does not disappear, consult
your dealer.
Will disappear when the temperature returns to
normal.
The disc is not playable in this unit. Eject the
disc, and insert a disc compatible with this
system.
Press the EJECT button and pull out the disc.
Check the disc for serious damage, signs of
deformation, excessive scratches, and/or dirt
(see page 353 ). Insert the disc again. If the code
does not disappear, or the disc cannot be
removed, consult your dealer. Do not try to
force the disc out of the player.
On vehicles with navigation system
DVD Player Error Messages
Ultrawide Rear Entertainment System
Fe
a
tu
re
s
469
DISC ERROR
MECH ERROR
HEAT ERROR
REGION ERR
UNSUPPORTED
PUSH EJECT
BAD DISC
PLEASE CHECK
OWNERS MANUAL
10/07/17 10:37:14 31TK8600_474
2011 Odyssey