HONDA 2011 Odyssey - Manual (Page 660)

CONTINUED
Unscrew the wing bolt and take
the spare tire out of its well.
Place blocks in front and back of
the wheel diagonally opposite the
tire you are changing.
Loosen each wheel nut 1/2 turn
with the wheel nut wrench. Place the jack under the jacking
point nearest the tire you need to
change. Turn the end bracket
clockwise until the top of the jack
contacts the jacking point. Make
sure the jacking point tab is
resting in the jack notch.
8.
9.
10. 11.
Changing a Flat Tire
T
a
k
ing
Car
e
of
th
e
U
nex
p
ect
e
d
657
WHEEL NUT WRENCH JACKING POINT
The wheel nut wrench supplied with
your vehicle is specially adapted to f it
the hoist shaf t. Do not use any other
tool.
10/07/17 11:02:15 31TK8600_662
2011 Odyssey