HONDA 2011 Odyssey - Manual (Page 630)

Insert the new bulb into the hole,
and turn it one-quarter turn
clockwise to lock it in place.
Push the electrical connector onto
the new bulb.
Turn on the headlights to test the
new bulb.
Remove the electrical connector
from the bulb by pushing on the
tab and pulling the connector
down.
Remove the bulb by turning it
about one-quarter turn
counterclockwise.
Reinstall the air intake duct
securely.
Reinstall the engine coolant
reserve tank and power steering
reservoir.
Open the hood.
Remove the electrical connector
from the bulb by pushing on the
tab and pulling the connector
down.
Remove the bulb by turning it
about one-quarter turn
counterclockwise.
4.
5.
6.
3.
7.
8.
2.
3.
1.
CONTINUED
Driver’s side
Passenger’s side
Lights
Low Beam Headlights
Ma
int
e
na
nce
627
TAB
CONNECTOR
BULB
BULB
TAB
CONNECTOR
10/07/17 10:58:08 31TK8600_632
2011 Odyssey