Installing a child seat – HONDA 2011 Odyssey User Manual
Page 56

Each third row seat has a tether
anchorage point behind the seat-
back.
Tighten the strap according to the
seat maker’s instructions.
Attach the tether strap hook to the
anchor, making sure the tether
strap is not twisted.
You can also remove the rear head
restraints (see page
). The
removed head restraints should be
secured in the cargo area so they will
not be thrown while you are driving.
Make sure to replace the head
restraints when the child seats are
not in use.
After properly securing the child
seat (see pages
and
), lift the
head restraint, then route the
tether strap over the seat-back and
through the head restraint legs.
Tighten the strap according to the
seat maker’s instructions.
If the tether strap is too long and
cannot be tightened firmly, find a
route where the strap can be
tightened securely.
3.
3.
1.
2.
Third Row Installation
Installing a Child Seat
Dr
iv
er
and
P
asseng
er
Saf
et
y
53
TETHER ANCHOR POINTS
ANCHOR
TETHER STRAP HOOK
ANCHOR
Center Position (except LX models)
TETHER STRAP HOOK
10/07/17 09:41:21 31TK8600_058
2011 Odyssey