HONDA 2011 Odyssey - Manual (Page 638)

Turn on the parking lights and
check that the new bulb is
working.
Reinstall the socket. Snap the
cover back in place.
Pull the bulb straight out of its
socket. Push the new bulb in until
it bottoms in the socket.
Open the tailgate. Place a cloth on
the edge of the cover to prevent
scratches. Remove it by carefully
prying in the notch on its edge
with a small flat-tip screwdriver.
Remove the license light assembly
by squeezing the tabs on both
sides of the socket.
Press the brake pedal to make
sure the new bulb is working.
Put the socket back into the light
assembly, and turn it clockwise to
lock it in place.
Reinstall the high-mount brake
light assembly into the tailgate.
Tighten the two screws and
reinstall the covers.
1.
2.
3.
4.
5.
5.
7.
6.
Lights
Replacing a Rear License Plate
Light Bulb
Ma
int
e
na
nce
635
BULB
COVER
TABS
10/07/17 10:59:22 31TK8600_640
2011 Odyssey