HONDA 2011 Odyssey - Manual (Page 51)

Lift the head restraint (see page
), then route the tether strap
through the legs of the head
restraint and over the seat-back,
making sure the strap is not
twisted.
Attach the attaching clip to the
anchor fitting, then tighten the
strap as instructed by the child
seat maker.
Unlatch the detachable seat belt
anchor latch and retract the seat
belt all the way into the ceiling.
Place the latch plate and anchor
latch in their holding slots (see
page
).
Remove the covers on each lower
end of the seat-back by pulling on
the handles.
To install a LATCH-compatible child
seat in the second row center seat
(except LX models), use the center
lower anchors as shown above.
Follow step 1 through 4 as
described previously to secure the
child seat.
1.
2.
3.
4.
5.
187
179
Installing a Child Seat
Using the Center LATCH
48
LOWER ANCHORS
BUTTON
TETHER STRAP
ATTACHING CLIP
TETHER ANCHOR FITTING
HANDLE
COVER
10/07/17 09:40:43 31TK8600_053
2011 Odyssey