HONDA 2008 Pilot - Manual (Page 259)

To remove the front turn signal
bulb, push it in slightly and turn it
counterclockwise.
Install the new bulb into the
socket and reinstall it.
Insert the socket back into the
headlight assembly. Turn it
clockwise to lock it in place.
Turn on the lights to make sure
the new bulb is working.
Remove the socket from the
headlight assembly by turning it
one-quarter turn counterclockwise.
To remove a bulb, pull it straight
out of its socket.
Install the new bulb into the
socket.
Remove the socket from the
headlight assembly by turning it
one-quarter turn counterclockwise.
Insert the socket back into the
headlight assembly. Turn it
clockwise to lock it in place.
Turn on the lights to make sure
the new bulb is working.
1.
4.
5.
3.
2.
1.
2.
3.
4.
5.
Lights
Replacing a Front Turn Signal
Bulb
Replacing a Parking Light/Front
Side Marker Light Bulbs
Ma
int
e
na
nce
255
SOCKET
SOCKET
BULB
BULB
2008 Pilot
Table Of Contents Main Menu