Vents, heating, and a/c – HONDA 2008 Pilot User Manual
Page 112
Airflow is divided between
the floor vents and the defroster
vents at the base of the windshield.
Air flows from the defroster
vents at the base of the windshield.
When you select
or
,
the system automatically switches to
fresh air mode and turns on the A/C.
In this case, you cannot turn the A/C
off.
When you select
, the system
automatically switches to fresh air
mode and turns on the A/C.
When you select
, the system
automatically switches to fresh air
mode and turns on the A/C.
This button turns the rear window
defogger off and on (see page
).
Use the mode control dial or button
to select the vents the air flows from.
Some air will flow from the
dashboard corner vents in all modes.
Each time you press the MODE
button, the display shows the mode
selected.
Air flows from the center
and corner vents in the dashboard.
Airflow is divided between
the vents in the dashboard and the
floor vents.
Air flows from the floor
vents.
When the indicator in the button is
on, air from the vehicle’s interior is
sent throughout the system again.
When the indicator is off, air is
brought in from the outside of the
vehicle (fresh air mode).
The outside air intakes for the
heating and cooling system are at
the base of the windshield. Keep this
area clear of leaves and other debris.
The system should be left in fresh
air mode under almost all conditions.
Keeping the system in recirculation
mode, particularly with the A/C off,
can cause the windows to fog up.
Switch to recirculation mode when
driving through dusty or smoky
conditions, then return to fresh air
mode.
77
On EX, EX-L, and EX-SE models
On LX and LX-VP models
On EX, EX-L, and EX-SE models
Vents, Heating, and A/C
Rear Window Def ogger Button
Mode Control
Recirculation Button
108
2008 Pilot
Table Of Contents
Main Menu