Vents, heating, and a/c – HONDA 2008 Pilot User Manual
Page 114
To remove fog from the inside of the
windows:
Set the fan to the desired speed, or
high for faster defrosting.
Select
. The system
automatically switches to fresh air
mode and turns on the A/C. The
A/C indicator (LX and LX-VP
models) or the A/C ON indicator
in the display (EX, EX-L, and
EX-SE models) will not be
displayed if it was previously off.
Adjust the temperature control
dial so the airflow feels warm.
Select
to help clear the
rear window.
Turn the fan on.
Turn on the air conditioning.
Select
and fresh air mode.
Adjust the temperature control
dial to your preference.
This setting is suitable for all driving
conditions whenever the outside
temperature is above 32°F (0°C).
Air conditioning, as it cools, removes
moisture from the air. When used in
combination with the heater, it
makes the interior warm and dry and
can prevent the windows from
fogging up.
you can
cool it down more rapidly by partially
opening the windows, turning on the
A/C, and setting the fan to
maximum speed in fresh air mode.
The vehicle has two A/C
units, one is in the front, and the
other is in the rear. The LX and
LX-VP units are independently
controlled. The EX, EX-L, and EX-SE
units are controlled by the front
panel controls, unless the RR A/C
MANUAL button is selected.
Set the fan to the desired speed.
Select MAX A/C.
The system automatically turns on
the A/C, selects
, and
switches to recirculation mode.
Make sure the temperature is set
to maximum cool.
To cool the interior with MAX A/C:
1.
2.
3.
4.
1.
2.
3.
4.
1.
2.
3.
If the interior is very warm,
On LX and LX-VP models
To Def og and Def rost
To Dehumidif y the Interior
Vents, Heating, and A/C
110
NOTE:
2008 Pilot
Table Of Contents
Main Menu