beautypg.com

Installing a child seat – HONDA 2008 Pilot User Manual

Page 53

background image

When not using the LATCH system,
all child seats must be secured to the
vehicle with the lap part of a lap/
shoulder belt.

With the child seat in the desired
seating position, route the belt
through the child seat according
to the seat maker’s instructions,
then insert the latch plate into the
buckle.

To activate the lockable retractor,
slowly pull the shoulder part of the
belt all the way out until it stops,
then let the belt feed back into the
retractor.

After the belt has retracted, tug on
it. If the belt is locked, you will not
be able to pull it out. If you can pull
the belt out, it is not locked, and
you will need to repeat these steps.

In addition, the lap/shoulder belts in
all seating positions except the
driver’s have a lockable retractor
that must be activated to secure a
child seat.

If you intend to install a child seat in
the center seating position of the
second row or in the third row, make
sure the detachable seat belt is
securely latched (see page

).

1.

2.

3.

17

CONTINUED

Installing a Child Seat

Installing a Child Seat with a Lap/
Shoulder Belt

Dr
iv

er
and

P

asseng

er
Saf

e

ty

49

2008 Pilot

Table Of Contents

Main Menu

This manual is related to the following products: